Nobel AM Series, Инструкция по эксплуатации

Страница: 14 / 27

AUTOMATIC SOFTENERS INSTRUCTIONS MANUAL
A
M
/T A
M
/RT A
M
/V A
M
/RV A
M
/METER A
M
/R METER
s.r.l. - IT
ALY
Page 14 of 15
am_tv
m
_mi-r
1.
d
o
c
- r.1

9.
Tr
ouble shooting guide
PROBLEM
CAUSE
HOW TO SOLVE
•
The
electronic programmer does not
switch ON.
•
electrical power is disconnected
•
the electrical feeder of the programmer is defected
•
the programmer is defected
•
connect electrical power
•
replace the electrical feeder
•
replace the programmer
•
The
buttons of the electronic
programmer are on block
•
a regeneration is running
•
the electronic programmer has received
electromagnetic interference from somewhere else.
•
the programmer is defected
•
wait until regeneration is completed
•
make a short-circuit on
the
battery
of
the
programmer;
enters again all programming
data
•
replace the programmer
•
The regeneration does not run
•
electrical power is disconnected
•
the programmer is not correctly adjusted
•
the programmer is defected
•
connect electrical power
•
adjust correctly the programmer
•
replace the programmer
•
Regeneration
is electrically started
but it does not run hydraulically
•
the geared motor of the programmer is defected
•
replace the geared motor of the programmer
•
Regeneration is on block
•
the geared motor of the programmer is defected
•
replace the geared motor of the programmer
•
Regeneration never ends
•
the electronic programmer has received
electromagnetic interference from somewhere else.
•
the microswitch of the programmer is defected
•
make a short-circuit on
the
battery
of
the
programmer;
enters again all programming
data
•
replace
microswitch
•
Brine tank is completely filled and
water overflows
•
the
drain
line
of
the softener is joined together with
over-flow line of brine tank
•
brine float valve blocked or damaged
•
connect the drain line and
over-flow
line
separately to floor drain
•
clean or replace float valve
fo
llo
ws