4
2.
Connect front panel / LCD cables
a) Connect Front USB 2.0, IEEE 1394 and Audio Connectors
b) Connect PWR Switch
c) Connect RESET Switch
d) Connect Card Reader internal USB cable
e) Connect LCD cables
See below table for more details
Connectors
Step 1: Connect Front USB 2.0, IEEE 1394 and Audio Connectors
See motherboard user manual for location and connection.
USB Port Color Codes
:
Red = +5V
White = Data- (-D)
Green = Data+ (+D)
Black = Ground (GND)
IEEE 1394 Color Codes
Black -- Ground (GND)
Red -- +5V
Blue -- +TPB (TPB+)
White -- -TPB (TPB-)
Yellow -- +TPA (TPA+)
Green -- -TPA (TPA-)
Audio Interface
Pin 1 (MIC IN) Red
Pin 2 (MIC GND) Black
Pin 5 & 6 (SR)
Pin 7 (Empty) White
Pin 8 & 9 (SL)
(AC97 Codec Header)
Connect USB Card Reader
Connect the card reader USB connector to the onboard USB port. See
motherboard user manual for location and connection.
USB Port Color Codes
:
Red = +5V
White = Data- (-D)
Green = Data+ (+D)
Black = Ground (GND)
Connect front Power/Reset switch connectors and Power Button LED
light power cord
PWR SW / RESET SW
See motherboard user guide for connection
Connect LCD PWR connector
Connect it directly to the Power Supply 12V connector. Like connecting the
case fan.
The power connector will serve:
o
LCD
Module
o
Power Button LED light
o
80mm HDD Cooling fan
