6
“C/F SW” enables you to set temp display reading
format when installing the system. (one time only)
Push down-Fahrenheit” / up-Celsius
CPU Fan Controller Connector
Connect the CPU Cooler Fan to the CPU FAN front controller connector so that
CPU Fan Speed can be controlled upfront. (
Minimum fan speed at 2000 is
recommended
)
If your motherboard has the Auto Fan Speed Control capability, simply connect the 4
pins extension fan connector from the LCD CPU Fan to the motherboard fan header.
Make sure you read the board fan pin diagram and connect to avoid board damage.
In such connection, motherboard will take control priority and LCD will only display
fan speed. No front fan speed control allowed.
LCD Replacement
If you wish to replace the hard coded LCD with programmable LCD,
please check our website for more details:
http://www.nmediapc.com/support_LCD.htm
Organize the cables with provided tied cables.
See picture for
reference.
Step 3: Install Hard Drive
1.
There are three 3.5” bays available for this model. SATA hard drive is preferred.
Step 4: Install CPU and Cooler
Follow your motherboard user manual to avoid damages
Step 5: Install memory module
Step 6: Install the power supply
1.
Install the power supply
2.
Connect power cables
a) to hard drive
b) to motherbaord 20/24 pin main
c) to motherborad 4 pin +12V
