NMC-WOLLARD MB-4 200-DF, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 315 / 321

Test and Troubleshooting
100
19
DPSG,YZ07927,107 –19–23JUN99–1/1
DIMENSIONAL CHECK
When the following conditions occur dimensional checks
must be done.
•
An oil leak at the weep hole in the transmission bell
housing.
•
An oil leak at the drain hole (if any) in the engine
flywheel housing.
•
If the drive plate and /or converter has been changed.
•
If the engine flywheel, or flywheel housing has been
changed.
•
If the engine has been changed.
NOTE: Refer to “Oil leaking from engine flywheel”.
DPSG,YZ07927,108 –19–23JUN99–1/1
DIMENSIONAL CHECK
REF 1
Flywheels with dimension “K” must comply with
dimensions “S” and “T” (as listed for each Funk converter
size), and dimensions “L” , “R”, and “U” will have to clear
the drive plate and converter assemblies.
DPSG,YZ07927,109 –19–23JUN99–1/1
DIMENSIONAL CHECK
REF 2
Check the flywheel for the following dimensions:
1. “C” dimension 100
±
1.27 mm (3.94
±
.05 in.) from the
flywheel housing mounting face to the pilot bore
positive stop.
2. “Z” dimension 46.23
±
.25 mm (1.82
±
.01 in) from the
flywheel mounting face to the pilot bore positive stop.
3. “B” dimension 53.85 mm (2.12 in Ref ) the flywheel
offset.
4. Engines with dimensions “C” 100
±
1.27 mm (3.94
±
.05 in) “Z” 71.88
±
.25 mm (2.83
±
.01 in) and “B”
39.62 mm (1.56 in Ref) requires a 14.22 mm (.56) thick
housing adapter.
CTM195 (28JUL99)
100-19
2000 Series Transmission
072899
PN=57