Signaling and CONTROL configuration
74
16-channel FWS
For switching of up to 16 individual wavelengths, connect application signals to
module pins
Blank
and
FSK pins 1 to 8.
shows a truth table
demonstrating the wavelengths selected based on the input signals from your
application.
Use profile 2 to configure the first 8 channels and profile 4 to configure the next
shows the configuration in CONTROL and how the configuration is
selected based on the input signals to the nine pins. To set up 16-channel fast
wavelength switching follow the steps in
.
Table 13
16-channel FWS truth table
Note:
You can also configure 16 wavelengths using profiles 1 and 3; however, the
logic of the signaling required for wavelength selection is reversed at the COM
-
MAND module.
Procedure 9
Setting up 16-channel fast wavelength switching
1. In CONTROL, click on the SELECT device icon and ensure the mode is set to
Fast Wavelength Switching
.
2. Select the VIS/NIR or NIR/IR crystal.
3. Set the modulation gain in the Setup page to the 0-5V range (see
NIR/IR modulation gain” on page 48
4. In each
Profile
2 and 4, configure 2 to 8 channels with their desired
shows 8 channels configured in profiles 2 and 4 of a
VIR/NIR crystal.
5. Set the power level desired for a channel. The power level across profile
channels is constant. For example if you set channel 2 in profile 2 to 50%, the
power level of channel 2 in profile 4 will also be 50%.
FSK1 FSK2 FSK3 FSK4 FSK5 FSK6 FSK7 FSK8 Blank Wavelength selected
High Low
Low
Low
Low
Low
Low
Low
Low Profile 2 Channel 1
Low High Low
Low
Low
Low
Low
Low
Low Profile 2 Channel 2
Low
Low High Low
Low
Low
Low
Low
Low Profile 2 Channel 3
Low
Low
Low High Low
Low
Low
Low
Low Profile 2 Channel 4
Low
Low
Low
Low High Low
Low
Low
Low Profile 2 Channel 5
Low
Low
Low
Low
Low High Low
Low
Low Profile 2 Channel 6
Low
Low
Low
Low
Low
Low High Low
Low Profile 2 Channel 7
Low
Low
Low
Low
Low
Low
Low High
Low Profile 2 Channel 8
High Low
Low
Low
Low
Low
Low
Low
High Profile 4 Channel 1
Low High Low
Low
Low
Low
Low
Low
High Profile 4 Channel 2
Low
Low High Low
Low
Low
Low
Low
High Profile 4 Channel 3
Low
Low
Low High Low
Low
Low
Low
High Profile 4 Channel 4
Low
Low
Low
Low High Low
Low
Low
High Profile 4 Channel 5
Low
Low
Low
Low
Low High Low
Low
High Profile 4 Channel 6
Low
Low
Low
Low
Low
Low High Low
High Profile 4 Channel 7
Low
Low
Low
Low
Low
Low
Low High High Profile 4 Channel 8
Содержание A203-000-001
