OPERATION
The machine must reach full speed before beveling/deburring begins.
•
Hold the machine keeping the table plate flat and securely to the workpiece. From the operator ’s
perspective, the spindle is spinning clockwise, so always operate in the direction from left to right
(up mill).
•
When performing inside bevels, work in a clockwise direction only.
•
Do not bevel too much per pass. If more depth is needed, make multiple passes until the desired
bevel height is reached
MAINTENANCE
1.Keep tool clean
Periodically blow the machinewith dry compressed air. All plastic parts should be cleaned with a soft
damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise
damage the material.
Wear safety glasses while using compressed air.
If the replacement of the power supply cord is necessary, this has to be done by the
manufacturer or their agent in order to avoid a safety hazard.
WARNING: All repairs must be entrusted to an authorized service center.
Incorrectly performed
repairs could lead to injury or death.
