IS-Dev Kit-8 User Manual
7850 East Gelding Drive • Scottsdale, AZ 85260-3420
IS-Dev Kit 8 Users Manual A.doc
Page 11 of 31
Toll Free
1.877.2BUYNKK (877.228.9655)
•
Phone
480.991.0942
• Fax
480.998.1435
www.nkkswitches.com
1209
The timer for 25 frame/s video is 40 ms so some possible Timer1 and Timer2 values can be as followed:
Timer1 = 01H and Timer2= 28H or Timer1=05H and Timer2=08H.
For HEX numbering and conversion between HEX and decimal please refer to the appendix.
An Example of How Attributes Work
The following demonstrate the way attributes of Screen shot 2 (above) works. The Illustration 2 (below)
visually demonstrates the way these attributes work.
The blue is the top switch action, the green is the middle switch action, the red is the bottom switch action, and
the dotted violet line is the timer action.
Illustration 2, Examples of various loops
Illustration only shows switch and timer actions that result in an image change on the
display. All other attributes are ignored by the controller and are not shown.
When the Dev Kit enters the Main Operational Mode the image at the address 0001H is displayed. The
Attribute Block at address 0001H becomes active.
