NKE Multifunction SL50, Руководство пользователя и инструкция по установке, Страница: 7 / 23

- 7 –
SL50
User guide – 33-60-022-000
1.4 Channel selection
Using the remote control, configure the display according to your requirements. Examples of
configuration:
Procedure
-
Using the keys and
,
you can select in the list the channel you wish to display.
-
The new channel to display is recorded.
1.5 What is a sub-channel
The sub-channels are made to modify setting and display parameters of the channels. For
example, the sub-channels of the
surface speed
channel are:
-
the
offset
and the
calibration coefficient
: setting parameters of the log-speedometer
sensor,
-
the measurement
unit
: in knots or in km/hr,
-
the
filter
setting,
-
the setting of the
upper alarm
and the
lower alarm.
The same applies to all channels present on the
TOPLINE bus
. The following chapters provide
detailed explanations on how to access the sub-channels and implement the settings.
CAUTION
: if your installation is equipped with several
TOPLINE
displays, make sure that
the remote control controls the display which you wish to operate. Press the key
repeatedly, until the intended display blinks.
nke
SL50
16.85
BOAT SPEED
nke
SL50
30.1
DEPTH