NKE Multifunction SL50, Руководство пользователя и инструкция по установке, Страница: 5 / 23

- 5 –
SL50
User guide – 33-60-022-000
1.2 List of channels created
The master display, whether it is the
SL50
or any other
TOPLINE
display
,
and each
TOPLINE
sensor, automatically create their respective channels when they are connected to the
TOPLINE bus
.
Channel designation
Magnetic heading
Apparent wind angle
Apparent wind speed
Depth
Surface speed
Maximum and average speed
Distance and heading to man over
board
Configuration
Bus voltage
VMG
CMG
True wind speed
True wind angle
True wind direction
Corrected heading
Estimated distance
Estimated angle
Total log
Channels created
by the
SL50
when set as
master display
Daily log
Target speed
Heading on other side
NMEA
Performance
channels displayed
Optimum wind angle
Optimum VMG angle
Optimum CMG angle
Efficiency at close-haul
Polar efficiency
Bottom speed and bottom heading
NMEA channels
displayed
Cross-track error
Please note that the channels
MAX SPD
and
AVERAGE SPD
can be accessed when the
SL50
is
master. By default, these channels are calculated using the surface speed, and in the absence of the
latter it will be calculated using the bottom speed. These average and maximum values are calculated
from the last power-up of your installation. You can reset these channels to zero, without switching off
the bus : select the channel
MAX SPD
and
AVERAGE SPD
then press the key for 2 seconds.