Nivus osm-f, Инструкция по эксплуатации

Страница: 46 / 103

Instruction Manual
OCM F
Page 46 OCM F - Rev. 04 as of 18.02.2014
®
System time
In order to perform various control or memory functions, the unit includes an
internal clock saving dates of year, weekdays and week numbers. The clock
settings can be modified if required (different time zones, summer time / winter
time etc.). First select the menu point “Info”:
Fig. 9-13 system time - submenus
The complete system time is indicated after the settings have been confirmed:
Fig. 9-14 complete system time
This menu point is for indicating purposes only. Hence the system time can-not
be adjusted here. Modifications can be carried out in the individual menus >set
date< and >set time< (Fig. 9-13). Select between 12 h or 24 h mode in >set for-
mat< submenu.
Totalizer
This menu allows to newly set the totalizer indicated on the main screen. This
feature is normally used when replacing a transmitter which has to indicate the
same value as before replacement.
After the new value has been set confirm using the "Enter“-key and type in the
PIN “2718“. (2 faulty entries allowed). Otherwise the modified value will not be
accepted.
Fig. 9-15 Totalizer modification
Fig. 9-16 PIN-Code request