Nivus osm-f, Инструкция по эксплуатации

Страница: 38 / 103

Instruction Manual
OCM F
Page 38 OCM F - Rev. 04 as of 18.02.2014
®
After confirming with >ENTER< the auxiliary screen appears.
1 Level
2 Velocity
3 Medium temperature
4 Current date / system time
5 Digital input status
Fig. 8-3 Auxiliary screen
There are 5 basic menus available for selection, programming and diagnostic
options which are visible in the display headline. These menus can be accessed
via the arrow buttons >left< or >right<.
RUN
Standard operation mode. It allows to display day totals and, if
available, error messages. Furthermore it is possible to set the time
of 24 h-totalizing and to reset the daily totalizer.
PAR
This menu is the most extensive of the OCM F. It is for the com-
plete parameter setting of dimensions of the measurement place,
sensors, analog and digital inputs and outputs and regulator func-
tion, damping and system reset.
I/O
This menu includes information about internal operation of the
OCM F. All current values can be displayed, as well as the values
of analog and digital outputs and relays. Additionally it is possible to
indicate the current flow velocity as well as the flow velocity distri-
bution.
CAL
Set maximum and minimum measurable flow velocity here. Calibra-
tion of analog outputs as well as simulation of analog and digital
outputs and calculated volumes is possible too.
EXTRA
This sub-menu includes basic display settings: contrast, language,
units, decimal digits, system times and totalizer pre-sets.