“Normal”, “High”, “Maximum” or “Individually”. The factory setting
is “High”. By following the procedure described below, you will set
the same temperature for all speciality coffees.
However, you can also set the temperature individually for each spe-
ciality coffee (see 4 below). Select the “Individually” setting in this
menu as follows:
!
Turn the Rotary control knob to the tool symbol, „settings“. Press
the Rotary control knob.
!
Turn the Rotary control knob to “Temperature”. Press the Rotary
control knob.
!
Turn the Rotary control knob to select your desired temperature.
!
Press the Rotary control knob to confirm your selection.
The other settings will now appear on the display screen.
!
From here you can either continue and program the other settings,
or leave the settings by pressing the
exit
button.
3.4. Setting timer functions
Caution: In order to use the functions described from 3.4.2 to 3.4.4, you
must first set the clock time (see 3.4.1).
Caution: If the machine has been switched off at the mains (Image 1/H),
or if there has been a power cut, you will have to set the clock time
again in order to use the functions described from 3.4.2 to 3.4.4.
Please note: Once the clock time has been set (see 3.4.1), it will appear
on the display screen when the machine is in stand-by mode. If the clock
time has not been set (see 3.4.1), the on/off symbol will appear on the
display screen in stand-by mode.
3.4.1 Setting the clock time
!
Turn the Rotary control knob to the tool symbol, „settings“. Press
the Rotary control knob.
!
Turn the Rotary control knob to “Times”. Press the Rotary control
knob.
!
Turn the Rotary control knob to “Clock”. Press the Rotary control
knob.
!
Turn the Rotary control knob to “Disabled” if you wish to deacti-
vate the clock, or to “Set clock” if you wish to activate the clock.
Press the Rotary control knob.
The hour display will now flash on the display screen.
!"#$%
&'()*''+
!"#$%
&'()*''+
!
Turn the Rotary control knob to select the appropriate hour
number.
!
Press the Rotary control knob to confirm your selection.
The minute display will now flash on the display screen.
!
Turn the Rotary control knob to select the appropriate minute
number.
!
Press the Rotary control knob to confirm your selection.
!
Press the
exit
button to leave the clock menu.
!
From here you can either continue and program the other time
settings, or leave the settings by pressing the
exit
button.
3.4.2 Setting the automatic switch-on time
Your machine can be programmed to switch itself on every day at a
set time. This means that your machine can be ready for use when
you come down for breakfast, for example. You can set the switch-on
time as follows:
!
Turn the Rotary control knob to the tool symbol, „settings“. Press
the Rotary control knob.
!
Turn the Rotary control knob to “Times”. Press the Rotary control
knob.
!
Turn the Rotary control knob to “Unit auto ON at”. Press the
Rotary control knob.
!
Turn the Rotary control knob to “Disabled” if you wish to deacti-
vate the automatic switch-on time, or to “Set auto ON” if you wish
to activate the automatic switch-on time. Press the Rotary control
knob.
The hour display will now flash on the display screen.
!
Turn the Rotary control knob to select the hour number for your
desired switch-on time.
!
Press the Rotary control knob to confirm your selection.
The minute display will now flash on the display screen.
!
Turn the Rotary control knob to select the minute number for the
switch-on time.
!
Press the Rotary control knob to confirm your selection.
Your machine will now switch itself on automatically every day at the
set switch-on time.
!"#$%
&'()*''+
72
GB
73
GB
3. Adjusting the basic settings
3. Adjusting the basic settings
