(Normal, High, Maximum). Press the Rotary control knob to con-
firm your selection.
!
From here, you can either continue and program the other set-
tings, or leave the settings by pressing the
exit
button.
4.3.2 Selecting individual settings for each Caffè Lungo
Independently of the standard setting in the menu item Settings/Cof-
fee recipes, you can select individual settings for each Caffè Lungo
that you brew.
!
In the main menu, turn the Rotary control knob to “Caffè Lungo” /
the Caffè Lungo symbol.
!
Press the > button (Image 1/C) until the bean symbol is flashing
to indicate that you can change the aroma.
!
Whilst the symbol is flashing, turn the Rotary control knob to
select your setting.
Do you wish to set other parameters, e.g., the amount or the number
of cups?
!
Press the > button (Image 1/C) as many times as necessary until
the parameter you require starts flashing.
!
While the symbol is flashing, turn the Rotary control knob to
select your setting.
!
You can apply your settings by pressing the
exit
button or by mak-
ing no further changes.
Please note: Do not forget whether you are brewing one or two cups, and
put the cup(s) under the spout as required (Image 6).
!
Press the Rotary control knob to start brewing your coffee.
Please note: If you start brewing your coffee inadvertently or too early,
you can actually change some parameters while the coffee is being
brewed. The parameter that you can change will flash in the bottom line
of the display screen.
!
While the symbol is flashing, turn the Rotary control knob to
select your setting.
After the bean symbol for aroma, the “ml” display for amount will
flash in the middle of the bottom line, so you can change these
parameters at any time.
!"#$%
&'()*''+
!/#$%
!-
&'()*''+
!
If you wish to abort a brewing process, press the exit button (Image
1/D).
4.4 Brewing a Cappuccino
The standard factory setting for Cappuccino is: aroma “normal”, vol-
ume per cup 200ml, proportion of coffee 20 %, 1 cup.
The display screen shows: the 3-bean symbol, “200ml”, “20 %”, the
1xcup symbol.
Using the special spumatore (milk frother), you can froth milk straight
from the carton or other container and pour it straight into the cup or
glass.
!
Connect the inlet hose to the height-adjustable spout (Image 7).
!
Dip the other end of the inlet hose (Image 8) directly into the milk
carton or container.
Caution: Dried milk residue is hard to remove, so please clean the equip-
ment thoroughly as soon as it has cooled down! Always follow the mes-
sage on the display screen, “Rinse frother”.
You can brew your Cappuccino in two different ways:
1. You can either use the
standard settings
from the “Coffee recipes”
menu. These are the factory settings which you can nevertheless
change individually to suit your own taste, as described below.
2. Or you can change the setting according to your taste
for each indi-
vidual drink brewed. This does not alter the standard settings.
4.4.1 Brewing a Cappuccino using the standard setting
!
Place a cup under the spout (Image 5).
!
Turn the Rotary control knob to the Cappuccino symbol. Press the
Rotary control knob.
The cup illumination will now come on, and the machine will brew a
cup of Cappuccino according to the standard setting.
You can change the standard setting as follows:
!
Turn the Rotary control knob to the tool symbol, „settings“. Press
the Rotary control knob.
!
Turn the Rotary control knob to “Coffee recipes”. Press the Rotary
control knob.
!"#$%
&'()*''+
.#0
.##$%
!-
&'()*''+
!"#$%
&'()*''+
!"#$%
&'()*''+
86
GB
87
GB
4. Brewing speciality coffees
4. Brewing speciality coffees
