!
Selecting amount of milk
!
Turn the Rotary control knob to “Amount milk”. Press the Rotary
control knob.
!
Turn the Rotary control knob to the amount of your choice. Press
the Rotary control knob to confirm your selection.
!
From here, you can either continue and program the other set-
tings, or leave the settings by pressing the
exit
button.
!
Selecting amount of froth
!
Turn the Rotary control knob to “Amount froth”. Press the Rotary
control knob.
!
Turn the Rotary control knob to the amount of your choice. Press
the Rotary control knob to confirm your selection.
!
From here, you can either continue and program the other set-
tings, or leave the settings by pressing the
exit
button.
!
Selecting temperature
!
Turn the Rotary control knob to “Temperature”. Press the Rotary
control knob.
!
Turn the Rotary control knob to the temperature of your choice
(Normal, High, Maximum). Press the Rotary control knob to con-
firm your selection.
!
From here, you can either continue and program the other set-
tings, or leave the settings by pressing the
exit
button.
4.5.2 Selecting individual settings for each Latte Macchiato
Independently of the standard setting in the menu item Settings/
Coffee recipes, you can select individual settings for each Latte Mac-
chiato that you brew.
!
In the main menu, turn the Rotary control knob to “Latte Mac-
chiato” / the Latte Macchiato symbol.
!
Press the > button (Image 1/C) until the bean symbol is flashing
to indicate that you can change the aroma.
!
Whilst the symbol is flashing, turn the Rotary control knob to
select your setting.
Do you wish to change other parameters, e.g., the amount or the
proportion of coffee?
!
Press the > button (Image 1/C) as many times as necessary until
!"#$%
&'()*''+
.#0
1##$%
!-
&'()*''+
the parameter you require starts flashing.
!
While the symbol is flashing, turn the Rotary control knob to
select your setting.
!
You can apply your settings by pressing the
exit
button or by mak-
ing no further changes.
Please note: Do not forget whether you are brewing one or two cups (850
model only), and put the cup(s) under the spout as required (Image 6).
!
Press the Rotary control knob to start brewing your coffee.
Please note: If you start brewing your coffee inadvertently or too early,
you can actually change some parameters while the coffee is being
brewed. The parameter that you can change will flash in the bottom line
of the display screen.
!
While the symbol is flashing, turn the Rotary control knob to
select your setting.
After the bean symbol for aroma, the “ml” display for amount, and
then the “%” display for proportion of coffee, will flash in the middle
of the bottom line, so you can change these parameters at any time.
!
If you wish to abort a brewing process, press the
exit
button (Im-
age 1/D).
4.6 Preparing warm milk (e.g. for warm chocolate)
The standard factory setting for warm milk is: 150ml, proportion of
froth 20%.
The display screen shows: “150ml”, “20%”.
Using the special spumatore (milk frother), you can froth milk
straight from the carton or other container and pour it straight into
the cup or glass.
!
Connect the inlet hose to the height-adjustable spout (Image 7).
!
Dip the other end of the inlet hose (Image 8) directly into the milk
carton or container.
Caution: Dried milk residue is hard to remove, so please clean the
equipment thoroughly as soon as it has cooled down! Always follow the
message on the display screen, “Rinse frother”).
You can prepare your warm milk in two different ways:
!"#$%
&'()*''+
.#0
!"#$%
&'()*''+
92
GB
93
GB
4. Brewing speciality coffees
4. Brewing speciality coffees
