Nivetec UNICONT, Инструкция по установке и программированию

Страница: 16 / 24

16 / 24

pdf4012m0600p_06

BKI15ATEX0013X/1
5.1 D
EFAULT
Manufacturer’s settings are the following:
The percental (%) value shown on the display is proportional to the input (4 mA

0%,
20 mA

100.0%).
Damping: 3 s
Noise suppression frequency: 50 Hz
Bargraph indication is proportional to the input (0/4 mA

0%, 20 mA

100.0%).
The output of the 3-wire models can be 4 – 20 mA current and / or HART signal
During operation:
COM LED flashes during HART communication
While pressing the key the input current appears on the display of the 2-wire models.
While pressing the key the output current appears on the display of the 3-wire models.
5.2 D
ISPLAY OF THE
SAP-202
AND KEYS OF THE UNIT
Symbols on the screen

DIST – distance displayed (when ON)

LEV – level displayed (when ON)

VOL – volume/content displayed (when ON)

% – percent displayed (when ON)

mA and °C current and temperature displayed
(when ON)

– arrow (points to the relevant engineering unit)

PROG – programming is in progress (when flashing)
Symbols and sign on the frame

M – metric system

US – imperial engineering unit system
ºF,
m, cm, in, ft, l, m 3 , gal, ft 3
LED
VALID
lights up during operation
COM
flashes during HART communication