pmm5111a0600p_01
27 / 32
10.7
O
PERATOR
M
ODE
This is the normal operating mode of the instrument from power-up. It can also be accessed from any other
mode via Select Mode as follows.
In order to provide proper operation, all parameters should be configured in the Configuration Mode
and Set-up Mode before using the Operator Mode!
From any Mode if there is no key activity for 2 minutes the controller automatically returns to
operator mode!
Display mode is in accordance to the selected value in Configuration Mode
parameter between
1…6.
Toggle between PV and SV can be performed with
button and values can be modified with
, or
buttons.
Entering Operator
Mode from an other
mode:
+
Other mode
10.7.1
D
ISPLAY MODES
The required display mode can be selected in Configuration Mode.
Displaying of SP Ramp Rate Value can be performed if parameter is enabled in Set-up Mode.
Display mode 1.
PV
SV
PV
SV
SV
SV
SP
value
Adjust the
etpoint alue
S
V
Adjust the etpoint
rame ate
if
S
F
R
=
Adjust value
or
Alarm 2. ON
Loop Alarm ON
Alarms
1 or more ALARM is ON
inactive alarms are blank
ALM LED indicator flashes
Set oint alue
display
Adjusted etpoint alue
p
V
=
S
V
Display mode 2.
PV
SV
SV
value
=
PV
SV
Loop Alarm ON
Alarm 2. ON
Setpoint alue
display
Adjusted etpoint alue
V
=
S
V
Adjust value
or
1 or more ALARM is ON
inactive alarms are blank
ALM LED indicator flashes
Adjust the et oint
rame ate
if
S p
F
R
Adjust the
etpoint alue
S
V
