Nivetec AquaSensors AV88, Руководство пользователя

Страница: 13 / 60

Thermo Scientific AquaSensors
™
AV88 Universal Analyzer User Guide 11
2.4. Personality Module Insertion and Removal
The AV88 can be configured to work with any AnalogPlus sensor parameter by installing the desired
personality module.
Removal
To remove a personality module, disconnect the sensor cable from the screw terminals, remove the acorn nut
from the center of the box and then pull on the push/pull rod as shown in Figure 2.1B. Be sure to keep the
acorn nut in a safe place so that a new module can be properly secured.
Insertion
Hold the personality module by the push/pull rod.
Insert the guidepost through the alignment hole.
Gently insert the module. Do not force the
connector pins in place.
When the personality module is seated, secure it
by installing the #4-40 Acorn Nut.
The full family of parameter specific personality modules and associated wiring information is shown in Figure
2.1C.
Figure 2.1B: AV88 with personality module removed
Push/Pull Rod
#4-40 Acorn Nut
to secure module
pH Personality Module