niu N-GT, Руководство по обслуживанию

Страница: 6 / 144

V1.0.0 6
Cable connector inspection
• Loose cables constitute a risk to electric safety. Cables should be checked after their clamping to
ensure electric safety.
• Bending of cable clamps towards welding points is not allowed.
• Cables are bound at designated positions.
• Cable placement at the scooter frame end or a sharp angle is not allowed.
• Cable placement at the bolt or screw end is not allowed.
•
Cable placement should be made away from thermal sources or positions where cables may be
stuck in moving.
• The cable placement along stem handles should not be made too tight or loose and should not
interfere with adjacent parts at any steering positions.
•
Cables should be placed smoothly without being twisted or tied.
• Verify whether the connector shroud is damaged or the connector is excessively open before
connecting.
•
Please protect the cable at a sharp angle or turning position with adhesive tapes or a hose.
•
Cables should be bound reliably with adhesive tapes after reparation.
• Controlling cables should not be bent or twisted. The controlling would not be flexible if controlling
cables were damaged.