Nitto MYTON MAG-50, Инструкция по эксплуатации

Страница: 9 / 12

8
8. STORAGE
CAUTION
When tool is not used, store it out of children.
Avoid storing the tool in a location subject to high
humidity. If the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation, oil the tool at the air inlet
with machine oil ISO VG-10 and run it for a short time.
9. ORDERING SERVICE PARTS
●
For further operational and handling information or
for replacement of parts and components, contact
the company from whom you purchased the tool or
an authorized dealer.
●
In ordering parts and components give each part
number, part name and quantity required.
●
Use only NITTO genuine parts.
10. OPTIONAL PARTS (MAGW-40)
Part No. Description
TQ01051 Sub Handle (Standard Type)
TB03216 Side Handle Ass’y (Low Vibration Type)
MAGW40_MAG50_E.indd 8 13.7.4 3:23:54 PM