12
6-2 Cutter Usage
CAUTION
●
Cutters other than one-touch type can not be used.
●
For better working and greater safety, do not use
worn or broken cutters.
●
When you need one-ouch type cutters or
accessories, refer to 10. Ordering Service Parts.
6-3 Cutter and Pilot Pin Combinations
WARNING
You must use a Pilot Pin which matches the cutter.
Pilot Pins differ according to cutter type, diameter, and
length (depth). An accident may be caused if the cutter
and Pilot Pin combination is wrong.
6 PREPARATIONS
WARNING
●
Turn the magnet switch off and detach the battery pack from the machine when preparing.
6-1 Attaching handle Ass’y
<Attachment and detachment of handle Ass’y >
1. How to attach the handle Ass’y
- Insert the sleeve of the handle Ass’y in the pinion shaft while the sleeve is pulled toward the handle. (Fig. 13)
- After it is attached, check that the handle Ass’y will not be detached before use.
* The handle Ass’y can be attached on either right or left of the machine. (Fig. 14)
* When the handle Ass’y interferes with the lock screw, attach the lock screw on the opposite side of the handle
Ass’y. Refer to 7-2-(3) Aligning with Punch Mark for attaching the lock screw.
2. How to detach the handle Ass’y
- The handle Ass’y can be detached by pulling the sleeve of the handle Ass’y toward the handle.
Pinion Shaft
Sleeve
Lock screw
Handle Ass’y
(Fig. 13)
(Fig. 14)
●
Match the appropriate Pilot Pin to the cutter which is
to be used. (Fig. 15)
HBO 12 to 17mm dia.
Depth 25 mm
HBO 17.5 to 27mm dia.
Depth 25 mm
06025
PN : TK01167
08025
PN : TJ12696
Pilot Pin
HI-BROACH Cutters
81 mm
5 dia.
8 dia.
76 mm
6.35 dia.
08035
PN : TJ15859
JBO 17.5 to 27mm dia.
Depth 35 mm
91 mm
8 dia.
Pilot Pin
JETBROACH Cutters
6.35 dia.
JBO 12 to 17mm dia.
Depth 25 mm
06025
PN : TK01167
81 mm
5 dia.
(Fig. 15)
●
Pilot Pins differ according to the type, diameter and
length (depth) of the cutter. If the cutter and Pilot Pin
combination is wrong, the cutter will be damaged due
to failure to eject the slag (metal chip) or poor Cutting
Oil supply.
15.+/2+..]AJ?+050.]C,glbb/0
/2,7,/.28.682.NK
