4
INSTRUCTIONS FOR
THIS TOOL
About Your Tool
WARNING
●
Proper use.
Always use the Abrasive Paper at a proper angle
(15°to 30°)to the process surface. Do not operate
other than on the surface used.
Negligence to do so causes the paper to be blown
off or damaged, which in turn may result in serious
accidents.
The Abrasive Paper must be of the same size as the
pad.(e.g.:The Abrasive Paper1" must correspond
with the 1" pad.)If an incorrect-size Paper is used,
the paper may be detached, causing serious
accidents.
The chuck must have a diameter of 6mm.Do not
use chucks not in conformity with the axis diameter
of the pad to be use. Detachment of the chuck may
result in serious accidents.
●
Use Nitto Kohki’s Back-up Pad only.
●
Checking before attaching Abrasive Paper.
Never use any Abrasive Paper for which the
allowable rotation speed shown on the Abrasive
Paper is lower than the free speed of the MLS-20.
Small rotation speed of the Abrasive Paper causes
damage, which in turn may result in serious
accidents.
Check for tears or chips on Abrasive Paper or pads;
defective ones must not be used. NO Abrasive
Paper soaked in liquid such as water must be used.
A defective Abrasive Paper causes damage, which
in turn may result in serious accidents.
●
Checking after attaching Abrasive Paper.
After attaching a new Abrasive Paper, place the unit
under an iron workbench to run it at least for one
minute. Make sure that there is nobody around the
rotation surface of the Paper. The test run usually
reveals defects on the Paper, improper attachment,
and incorrect dimensions or rotation speed.
●
Checking the rotation speed.
Make sure that the air pressure is set at 0.6MPa at
the start and that the free speed does not exceed
the rotation speed specified on the unit label or in
the instruction manual. If the rotation speed exceeds
the limit , request check
●
For Abrasive Paper only
Only Abrasive Paper must be used for the MLS-20.
Grindimg wheels must never be used for the unit.
1. USAGE
This tool is a handheld air sander that grinds steels
with an Abrasive Paper
2. C H E C K T H E C O N T E N T S O F T H E
PACKAGE
Check the contents and make sure that the tool does
not have any damage which may have occurred
during transportation. The contents should correspond
to the list as follows. In case of damage/missing
parts, please contact the sales agent from whom you
purchased the tool.
Part No.
Description
Qty
TP00475 Single Ended Spanner 14
2
TQ14382 PAD 2”
1
TQ14383 PAD 1.5”
1
TQ14384 PAD 1”
1
TQ14358 Abrasive Paper 1" x #60
2
TQ14359 Abrasive Paper 1" x #80
2
TQ14360 Abrasive Paper 1" x #100
2
TQ14361 Abrasive Paper 1" x #120
2
TQ14366 Abrasive Paper 1.5" x #60
2
TQ14367 Abrasive Paper 1.5" x #80
2
TQ14368 Abrasive Paper 1.5" x #100
2
TQ14369 Abrasive Paper 1.5" x #120
2
TQ14374 Abrasive Paper 2" x #60
2
TQ14375 Abrasive Paper 2" x #80
2
TQ14376 Abrasive Paper 2" x #100
2
TQ14377 Abrasive Paper 2" x #120
2
TQ14354 Instruction Manual
1
3. PART NAME
/RFN/HYHU
9DOYH%RG\
7KURWWROH/HYHU
&KXFN1XW
6SLQGOH
Fig.1
15.+/2+01]KJQ+0.]CĦڧٖǞħ,glbb2
/2,//,448..813NK