3
MAINTENANCE/SERVICE
●
Do not take apart or modify tool.
Disassembly or modification carried out without
the supervision of a qualified or authorized service
engineer could result in an accident or injury.
●
Inspect cutting tool and accessories, etc.
A l w a y s c h e c k t o s e e t h a t c u t t i n g t o o l a n d
accessories, etc. are in good operating condition
without damage or deterioration before you mount
them on the tool. Should you find any damage to
an accessory or part, please contact sales agent
through which you have purchased your tool or an
authorized dealer near you for repair.
●
Check parts for damage.
When you have found damage to accessory or
other part, carefully check the damaged part to
determine the extent of influence it has upon the
functions of the tool – that is, determine whether it
can still perform its normal functions.
Check to see that moving parts are securely
mounted is OK, that all parts are OK without
damage, that they are properly mounted, and that
the tool functions normally. Should you find any
damage to an accessory or part that may hamper
proper functioning of the tool, please contact sales
agent through which you have purchased your tool
or an authorized dealer near you for repair.
●
Have your tool repaired at an authorized Nitto
Service Center.
For repair or parts replacement, please contact the
sales agent through which you have purchased your
tool or an authorized dealer near you.
●
Use only Nitto genuine parts.
Use of improper parts may result in serious an
unexpected accident.
To obtain a Nitto genuine part, consult this Manual
or contact the sales agent from which you have
purchased your tool directly.
●
Do not detach label or nameplate from tool.
When a label/nameplate gets damaged, worn or
becomes missing, contact the sales agent through
which you have purchased your tool or Nitto Kohki
Co., Ltd. directly for a replacement.
DISPOSAL
●
When a tool is taken permanently out of service, it
is advised that the tool is disassembled, degreased
and parts separated by material and recycled locally
in the appropriate manner.
GENERAL:
PNEUMATIC TOOLS
WARNING
●
Use appropriate air pressure.
Excessively high air pressure will increase the
number of revolutions or strokes causing not only
potential premature failure/breakage but could also
lead to an unexpected accident or injury.
●
Connect tool to air supply line.
There are various types of pipes running in a factory
in addition to the pneumatic line (such as oxygen,
nitrogen, gas and water). For this reason, always
ensure that you are connecting to the pneumatic
line.
●
Start tool properly.
Turn the start switch OFF before connecting to the
air supply line.
●
Always disconnect the tool from the air supply
line before putting on/taking off any accessory
and prior to carrying out any maintenance work.
●
Avoid exposure to exhaust air.
P n e u m a t i c t o o l e x h a u s t a i r c o n t a i n s o i l a n d
contaminated moisture. Make sure the exhaust air is
not directed towards your face or anyone else within
the work area.
●
Keep tool off electricity.
This pneumatic tool is not electrically insulated. To
avoid a potential electric shock do not use where
there is a possibility of coming into contact with live
electricity.
CAUTION
●
Handle tool carefully.
Abusive use of tool could invite failure or accident.
Do not throw, drop or shock the tool.
●
Handle connecting hose carefully.
Do not carry the tool by the air hose.
Do not pull the air hose to disconnect.
15.+/2+01]KJQ+0.]CĦڧٖǞħ,glbb1
/2,//,448..812NK
