Nitto Kohki EJC-32A, Инструкция по эксплуатации

Страница: 4 / 12

1 USAGE
This is an electric hand-held fast multiple needle scaler for
scaling workpieces such as slags and spatters.
2 CHECK THE CONTENTS OF THE
PACKAGE
Check the contents and make sure that the tool does not have
any damage due to an accident during the transportation, if
any. The contents should correspond to the list as follows.
Just in case there are some damages or missing parts, contact
the sales agent from whom you purchased the tool or an
authorized dealer.
THE CONTENTS OF THE PACKAGE AND ACCESSORIES
3 Names of Part
4 Caution for Use
WARNING
●
Use of power is limited to the power specified by the rating
plate.
●
Check to see that the earth leakage breaker is installed.
Even when using power supply in which the earth leakage
breaker is set, it should be used after grounding for the
purpose of more safety.
●
Note that power cord which is too long may cause a voltage
drop. Do not use another electric tool together.
●
When performing maintenance, inspection, replacement or
adjustment of parts, make sure to disconnect the attachment
plug from the receptacle.
●
Do not remove a rating plate. Please contact sales agent for
replacement if they are taken off or damaged.
●
If you feel discomfort or pain while using this tool, stop using
it and have a doctor examine you.
●
Check if it conforms to noise regulation in the area.
●
Do not operate it without any work as it may cause some
damage on the head of Needles. [Fig 1]
[Fig 1]
3
Needle Head
Side Handle
Holder Cover
Handle Holder
Cylinder A'ssy
Anvil Guide A'ssy
A
5 PREPARATION
WARNING
When the preparation is made, switch off and
take off the plug.
5-1 How to fix a Side Handle [Fig. 2]
Put the Holder Cover on the Handle Holder and fix it at an
arbitrary position with a Side Handle.
[Fig 2]
5-2 How to change a Needle [Fig 3]
To remove: Loosen the Hex. Socket Cap Screw with Hex.
Socket Screw Key and take out an Anvil Guide Ass'y from the
Cylinder Ass'y. The Needles with the Needle Supporter can
be removed. Replace them with the new ones.
To fix: Fix them without any clearance at A. The procedure is
the opposite of the removal.
[Fig 3]
Package Contents Q'ty check
ELECTRIC NEEDLE SCALER 1
Needle 3 φ× 180 15
Hex. Socket Screw Key 6
1
Instruction Manual 1
NITTO KOHKI
Flame
Push Button
Switch
Switch Handle
Oil Cup
Side Handle
Needle
Anvil Guide
A'ssy
Cylinder A'ssy
Extension Cable
max. Length Sectional Area
20 m 0.75 mm 2 Over
30 m 1.25 mm
2
Over
50 m 2 mm 2 Over