Nitto Kohki EJC-32A, Инструкция по эксплуатации

Страница: 2 / 12

Thank you very much for your purchase of this
Nitto Kohki products .
Before using your tool, please read this manual
carefully so that you may use it properly to get the
most out of it.
Please keep the manual handy - so you can
use it whenever necessary.
CONTENTS page
IMPORTANT SAFETY INSTRUCTIONS FOR ALL
ELECTRIC TOOLS
1. USAGE
……………………………………………………
3
2. CHECK THE CONTENTS OF THE PACKAGE ……… 3
3. NAME OF PART
…………………………………………
3
4. CAUTION FOR USE
………………………………………
3
5. PREPARATION …………………………………………… 3
6. HOW TO OPERATE THE TOOL
………………………
4
7. MAINTENANCE AND INSPECTION
……………………
4
8. OPTIONAL ACCESSORIES …………………………… 6
9. ORDERING SERVICE PARTS
…………………………
6
10. JET CHISEL (EJC-32A) 110V-120V
~
60Hz ASSEMBLY AND PARTS LIST ………………… 7
11. JET CHISEL (EJC-32A) 220V-240V
~
50Hz ASSEMBLY AND PARTS LIST
…………………
9
PICTOGRAM
Warning: It might be dangerous to operate the tool if the
instructions supplied are not followed.
Using this tool improperly could result in serious injury.
Read the instruction manual before use.
Always wear suitable eye protection.
Always wear suitable hearing protection.
Always wear respiratory protective equipment (PPE).
Always wear protective gloves for protection of hands
from Vibration and Shock
Storage Temperature : -10˚C~60˚C (no freezing)
Storage Humidity : Maximum 90% at 25˚C (no dewing)
Operating Temperature : 5˚C~40˚C
Operating Humidity : Maximum 90% at 25˚C (no dewing)
Altitude : 1000m Max.
Over-voltage Category : Category II according to IEC60664-1
Pollution Degree : Degree 3 according to IEC60664-1
1