3
EN
Plug the power plug securely all the way in to an electrical outlet.
An improperly connected power plug could overheat, and dust adhering to the plug could cause a fire or electric
shock.
Metal pieces adhering to an improperly connected power plug could also result in a fire or electric shock.
Tools with a ground wire need to be grounded properly.
Tools that are not grounded properly could cause an electric shock.
Follow the instructions for lubricating and changing accessories.
Inspect tool cords periodically and if found to be damaged have them repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean and free from oil and grease.
Before further use of tool, it should be carefully checked to determine that it will operate properly and perform its
intended function.
A guard or other part that is damaged should be properly repaired or replaced at an authorized service center
unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized service center.
The use of any accessory or attachment other than those recommended in this instruction manual could present a
risk of personal injury.
Do not remove the label or nameplate on the tools.
If labels or nameplates are broken or peeling, for a replacement label or nameplate contact the retailer where you
purchased the tool.
This Product Specific Safety Rules
WARNING
Make sure to check the connectable electric screwdriver in the "Electric screwdriver model list".
Never connect an electric screwdriver model which is not in the list, a product other than an electric screwdriver or a
product of another company.
Doing so could cause a fire or accident.
Use the tools indoors.
This tool is not dust and leak-proof. Exposure to dust, sand, or rain while using it outdoors could cause a failure.
If the tool is accidentally dropped or hit, check to ensure there is no breakage, cracking or deformation.
Breakage, cracking or deformation could cause electric shock or injury.
When the tool becomes overheated, or you notice anything abnormal during usage, switch it OFF immediately and
request that the tool be repaired.
Before starting work, make sure there is no flammable materials around the device.
Flammable materials could cause a fire or accident.
About Unit Notation
This instruction manual is written using both SI units and the imperial measurement method (yards, pounds).
Numeric values outside the ( ) are the value in SI units, while those inside the ( ) are the imperial measurement
value.
Notation
Example:
Length
25.4
(1") Weight:
0.45
(1) Torque:
1.13
(10)
in
mm
lbs
kg
Lb·in
Nm
TV07527-1̲DEA0241N-AZ̲en̲fr̲de̲it̲es̲pt.indb 3
2017/07/04 13:09:14
