Nitta PolySprint NPS-0310H1, Руководство по эксплуатации

Страница: 17 / 24

- 16 -

The cam is hitch to the frame. And the clamp
lever is turn to the main body side.
※ Turn until the clamp lever becomes parallel to the
main body.
※ It is normal that the current temperature
drops by 20~30˚C right after the pre-setter
is inserted. The pre-setter cools the
press, but it will be heated up to the set
temperature.
※
※
Monitor the heating time by a stopwatch or
timer. Heat the press for the specified time for
the belt type and belt width. For details on the
heating time, refer to the attached Endless
Conditions Table.