Nitta PolySprint NPS-0310H1, Руководство по эксплуатации

Страница: 13 / 24

- 12 -
7. How to Operate PolySprint ™ Heat Press- continued
7-4) Operation (Heating)

To start operation, push and hold the switch. The in-operation lamp lights up and
controlled power is supplied to the heater. Heating begins.
※
To avoid malfunction, you always need to push and hold the switch for about
two seconds when turning it on or off.
When handling the press while it is in use, always wear anti-heat gloves to
prevent burns.
※
As the controlled power is supplied to the heater, the heater output power indicator
on the temperature indication display goes on and off (the heater output power
indicator is on when the controlled power is supplied and is off when the controlled
power is ready to supply.)
An operator should not leave a press unattended while it is in use. To help
prevent burns, pay attention to others who may carelessly touch the press.

To stop operation, push and hold the switch once more. Heating control of the
heater comes to a stop and the in-operation lamp lights off.
The press is still at a high temperature after operation. When handling the
press, always wear anti-heat gloves to prevent burns.
The press is still at a high temperature after operation. It takes about two
hours for the press to cool down to room temperature. An operator
should pay attention to others who might carelessly touch the press.
HEAT
HEAT
WARNIN G
WARNIN
G
WARNIN
G
WARNIN G
HEAT