NITRON TVT22, Руководство по установке, Страница: 13 / 16

15
Step 9 Installation Of The Spring Hardware
You are now ready to close the fork. Screw
NTT050268 – piston rod holder onto the end of the
piston rod. Install the spring, upper spring seat,
spring spacer tube and spring preload cap. Pull the
piston rod upwards and then insert a 17mm
spanner through the window in the spring preload
cap. You can now remove the piston rod holder
tool.
Final Assembly Instructions
Step 10 Top Cap Installation
Screw the top cap onto the piston rod. Tighten the
top cap to the piston rod using a 14mm socket to
20N/m. A plastic socket insert is recommended to
prevent marring the aluminium.