NITRON TVT22, Руководство по установке, Страница: 11 / 16

Assembly Instructions
Step 3 Bleeding Air From The Fork
Work the upper fork tube up and down at least
fifteen times to bleed any air that may be trapped
between the two fork tubes.
Step 4 Bleeding Air From The Cartridge
Work the piston rod up and down at least fifteen
times to bleed the air from the cartridge.
11
Step 5 Setting The Oil Level (Air Gap)
Push the inner fork tube and the piston rod all the
way down. Using a suitable oil level tool add or
remove oil to obtain the specified oil height (refer to
the specification sheet for your model specific air
gap measurement). The quoted oil height is the
measurement from the upper edge of the fork tube
to the surface of the oil.
Step 6 Lower Spring Seat Installation
Install the lower spring seat onto the piston rod.
Make sure this piece is installed in the correct
orientation.
Step 7 Bump Stop Installation
Install the bump stop, plastic washer, bump stop
spacer tube, M10 washer and M10 locknut.
X