NitroAV Vanguard IIIS Series, Руководство пользователя

Страница: 8 / 25

- 8 -
transfer are desired, the system must provide SATA connection port.
4. Please decide on whether to select RAID 0 or RAID 1 (Default Parameter) prior to
using this device. After this device is used, reprogramming RAID will erase all your data,
so be sure to know which RAID setting you intend to stay with.
5. There is no data backup function with RAID 0, it allows the combination of 2
hard-disks to become one hard-disk of larger storage capacity and offers better efficiency
in transfer. Nevertheless, as long as one of the 2 hard-disk fails, it will cause damage on
data stored in both hard-disks.
2-4 How to install hard-disk in swappable tray
1. Place hard-disk in the frame of movable tray, and align the 4 screw positions, then use
#6-32 screws to fasten and secure it into position WARNING: Do not over tighten.
2. When assembly is done, gently push it along the sliding track into the hard-disk
compartment of VANGUARD IIIS, and then close the tray, as illustrated below.