NitroAV Vanguard IIIS Series, Руководство пользователя

Страница: 13 / 25

- 13 -
§ Setting up RAID 0
In the event you’d like to install one new hard-disk and one already used hard-disk, it is
advisable to select the new hard-disk to be the same as the used one in terms of brand,
size, and storage capacity.
．
Operation mode button RAID 0
1. RAID 0 will automatically detect the hard-disk with the smaller storage capacity of the
two, if one is larger than the other in terms of capacity, it will assign storage space base
on the hard-disk with smaller capacity, and combine the storage space of the two to
become storage capacity of one hard-disk.
(In other words, the smaller capacity multiplies by 2 to be considered one programmable
logic array.)
2. RAID 0 does not offer fault tolerance capability for data.
3. RAID 0 and RAID 1 can not be used simultaneously, only one could be selected .
4. Prior to selecting RAID 0, please do not turn on the power unless you have placed
hard-disk in swappable tray of Vanguard IIIS, and secure it into position.
5. Attention! In case you wan to switch operation mode from RAID 0 to RAID 1, please
backup date and remove it in advance, otherwise, the original date will be lost.
Notices:
1. In case it is necessary to turn off the power of Vanguard IIIS or disconnect its USB 2.0
connection cable, please stop the usage or exit of above items in the computer system.
(Hardware icons are displayed
at the lower right-hand corner on Windows desktop.)
2. During RAID 0 operation mode, in the event of one hard-disk fails, the all data will be
lost.