NitroAV Vanguard IIIS Series, Руководство пользователя

Страница: 15 / 25

- 15 -
once.
8. Then, the system will display the message “DATA WILL LOSE YES NO”, if you
agree, press ”
”button once.
9. On the next screen, the message “RESET SYSTEM YES NO” will be displayed, if
you agree, press ”
” button once.
10. And, you will hear the sound of a buzzer which means the system is following your
instruction to update RAID mode and perform data reconstruction.
In case you wish to switch RAID 0 to RAID 1, please follow above steps, when the
screen prompts you “RAID- 0 MODE YES NO”, please press ”
” button once, then
follow the above steps to continue, and the system will update RAID mode and perform
data reconstruction.
※
The button on the LCD panel introducing as below:
“ ▼ ” button : It appoints that it the sames as “ down ” function when you want to
enter to “ next page ” page or adjst the paramete.
” ▲ ” button: It appoints that it the sames as “ up ” function when you want to enter
to “ forward ” or adjust the parameter.
” ” button: It appoints that it the same as “enter ” function when you want to
enter the new parameter into the system.