Nipponia BRIO 125-3, Руководство пользователя

Страница: 46 / 54

45
EFI CARE AND INSTRUCTIONS
Service and Maintenance
1. All electrical components should be treated as fragile.
2. Additionally, strict precautions should be taken against water, oil etc. and materials that infiltrate
into electrical parts and onto terminals.
3. In order to avoid damage, do not allow the battery to come into contact with the injector.
4. The EFI supplies the fuel at high pressure, even with the engine stopped, pressurized fuel may
remain in the fuel system. Therefore, any fuel hose replacement must be carried out by a qualified
technician in a well-ventilated area.
5. The throttle stop screw is adjusted and set during production. Do not attempt to adjust it.
6. When performing any maintenance task which causes the temperature to rise, the temperature
of the ECU should not exceed 80
℃
7. Before performing any welding job, the ECU must be removed from the motorcycle.
8. Do not install any equipment that may produce radio or electromagnetic interference close to the
ECU.