Nipponia BRIO 125-3, Руководство пользователя

Страница: 22 / 54

21
DRIVING INSTRUCTIONS
Driving
1. Start the engine as previously described
2. Push the vehicle off the main stand, holding the rear brake lever
3. Get on the motorcycle, keeping at least one foot on the ground to support and prevent from falling

NOTE:
- If the engine does not start after pressing the start button for 3-4 seconds, turn the throttle grip open a little.
It may make the engine easier to start.
- After long term inactivity periods it may be difficult to start the engine. In such a case, hold the start button a
little more than usual and turn the throttle grip open a little.

NOTE:
- After starting in a cold state, allow the engine to warm up for approx. 3
minutes.
- If the engine is in cold state use the choke lever (1). Turn the lever to the (A)
position. After the engine is warm-up, do not forget to push the choke lever to
the off position (B).
- If the engine does not start with the electric starter, try using the kick starter,
following the above instructions.

NOTE:
- Review the safety information contained in this manual before driving.
- Always perform the pre-operation inspection before driving.