28
SERVICE AND MAINTENANCE
Engine oil replacement
The quality of the engine oil is the main factor that affects the life of
the engine. Engine oil must be replaced at prescribed service
intervals. Oil replacement must be carried out when the engine is
warm, and with the motorcycle in a level position.
1. First put an empty container under the engine crankcase and then
unscrew the oil scale plug.
2. Remove the drain bolt
(1)
under the right side of the crankcase. The
seal
(2)
, the oil screen spring
(3)
and the oil screen
(4)
will fall out and
the oil will start to drain.
3. Depress the kick starter several times to drain the oil completely.
4. Retrieve the oil screen
(4)
and clean it.
!
ATTENTION:
- After the engine has been running, the oil temperature is high. Exercise care to avoid injury from burning.
- If oil comes into contact with the skin, wash it away with soap or a cleaning agent.
!
WARNING:
- Never fill with oil over the MAX mark.
- If oil level is below the MIN mark, do not start the engine as it may be damaged. First top up the oil and then
start the engine.
1: Drain bolt, 2: Seal
3: Oil screen spring, 4: Oil screen
Содержание BRIO 125-3
Страница 1: ...Owner s manual BRIO 125 3 Nipponia S A...
Страница 52: ...51 SERVICE SCHEDULE Please refer to the owner s manual for the maintenance schedule of your vehicle VIN...
Страница 53: ...52 SERVICE SCHEDULE Please refer to the owner s manual for the maintenance schedule of your vehicle VIN...
Страница 54: ...53 SERVICE SCHEDULE Please refer to the owner s manual for the maintenance schedule of your vehicle VIN...
