IMPORTANT:
• As a safety feature, if the blade assembly is not fully seated, you will not be able to install and lock
the lid in position.
• If the control panel is flashing, this means the lid, bowl, or food pushers are not locked in place
correctly. Review steps to ensure you are installing all components correctly.
1
Place motor base on a clean, dry, level surface such as a countertop
or table, then plug in the unit.
2
Lower the Precision Processor® Bowl onto the motor base and
rotate clockwise until it clicks into place.
3
Exercising care, grasp the blade assembly by the top of the shaft
and place it onto the drive gear inside the bowl. Note that the
blade assembly will fit loosely on the drive gear.
4
Add ingredients to the bowl, making sure not to exceed the 12-Cup line.
5
Place the feed chute lid on the bowl and turn clockwise until you hear
a click, indicating the lid is locked in place. Press the Power button to
turn unit on.
6a
If using the Auto-iQ® Program
CHOP
,
PUREE
or
DOUGH
, the preset
feature will automatically stop at the end of the program. To stop the
unit at any time, press the currently active program again.
6b
If using a manual program, once the ingredients have reached your
desired consistency, press the active button again, or wait for the unit
to come to a complete stop after 60 seconds.
GET TO KNOW THE ATTACHMENTS
NOTE: DO NOT
add ingredients before completing installation of the blade assembly.
NOTES:
• Large food pusher must be inserted in the feed chute for the unit to run.
•
DO NOT
exceed the
CHUTE MAX FILL
line on the large feed chute. Unit will not run if ingredients
exceed this line.
NOTE:
Nesting workbowl also uses the included disc spindle.
ninjakitchen.com
ninjakitchen.com
7
When finished, press the button on the lid near the handle to
unlock, then turn counterclockwise and lift up from the bowl.
Always remove the blade assembly before emptying ingredients
from the bowl by carefully grasping it by the top of the shaft
and lifting it out of the bowl.
8
To remove the bowl from the motor base, turn the bowl
counterclockwise and then lift it up.
9
Press the Power button to turn the unit off, then unplug the
unit. Refer to the Care & Maintenance section for cleaning
and storage instructions.
USING THE BLADE ASSEMBLIES
BLADE ASSEMBLIES
3-PART FOOD PUSHER
DISC ASSEMBLIES
(disc assemblies vary by model)
4.5-CUP NESTING WORKBOWL
(not included with all models, available for purchase on ninjaaccessories.com)
IMPORTANT:
Ensure adjustable slicing disc is
NOT
on the
S
(storage) setting before installing it.
Return disc to
S
position after use.
REVERSIBLE SHREDDING:
The reversible shredding disc is ideal for different thicknesses of shredding.
Place the
FINE
side up for outputs such as shredded carrots, or place the
COARSE
side up for outputs such as shredded cabbage.
DISC SPINDLE:
Install disc spindle onto the drive gear of the
Precision Processor® Bowl to use the disc
assemblies or 4.5-Cup Nesting Workbowl.
STORAGE BOX:
(not included with all models)
Easily and safely store all your
accessories in the storage box.
To purchase, visit
ninjaaccessories.com
.
To accommodate different-sized ingredients, the pusher can be split
into 3 different sizes (small, medium, large). Use the small pusher for
ingredients like carrots, the medium pusher for ingredients like cucumbers
and zucchini, and the large pusher for ingredients like potatoes.
Use the Chopping Blade Assembly and Dough Blade Assembly in the 12-Cup Precision Processor Bowl.
ADJUSTABLE SLICING:
The adjustable slicing disc allows you to customize the slice thickness
(0.3–8mm). Great for mushrooms, zucchini, cucumbers, and potatoes.
The disc has 8 main settings with
1
/
3
-mm micro settings between each
(for a total of 24 individual settings) ranging from 0.3mm–8mm.
4.5-CUP NESTING WORKBOWL
The 4.5-Cup Nesting Workbowl is perfect for
smaller quantities of output. Place inside the
Precision Processor Bowl and you will be ready to
make all the delicious recipes in smaller quantities.
DOUGH BLADE
ASSEMBLY
CHOPPING BLADE
ASSEMBLY
SMALL CHOPPING
BLADE ASSEMBLY
FINE
COARSE
COARSE
FINE
SLICING
SHREDDING
SHREDDER
SLICER
REVERSIBLE SLICING/SHREDDING:
The reversible slicing/shredding disc is perfect for outputs like thinly sliced
cucumbers and shredded carrots. Face the side labeled
SLICER
up for
slicing and face the side labeled
SHREDDER
up for shredding.
