background image

ninjakitchen.com

ninjakitchen.com

SAVE THESE INSTRUCTIONS

37 

 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset, 

unplug the appliance and allow it to cool for approximately 15 minutes before using again. 

38   DO  NOT

 expose the containers and accessories to extreme temperature changes. They may 

experience damage. 

39 

 Upon completion of processing, ensure that the blade assembly is removed 

BEFORE

 emptying 

container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and 
lifting it from the container. Failure to remove the blade assembly before emptying the container 
results in a risk of laceration. 

40 

 The maximum wattage rating for this appliance is based on the configuration of the food processor bowl. 

41   DO  NOT

 submerge the motor base or control panel in water or other liquids. 

DO NOT

 spray motor 

base or control panel with any liquid. 

42   DO  NOT

 attempt to sharpen blades.  

43 

 Turn off the appliance and unplug the motor base before cleaning.

44 

 Never feed food by hand. Always use food pusher.

45 

 To reduce the risk of injury from damage to the food processing bowl or separation of the lid, 

DO NOT

 load the bowl with ice cubes for crushing. 

46 

 Unit is intended to create a dough ball. It is 

NOT

 intended to continuously knead. After dough ball 

forms, additional kneading should be done by hand on a work surface. If the unit moves excessively 
on the work surface, remove the dough ball and knead by hand.

13 

 This appliance has important markings on the plug blade. The entire supply cord is not suitable for 

replacement. If damaged, please contact SharkNinja for service.

14 

 Extension cords should 

NOT

 be used with this appliance.

15 

 To protect against the risk of electric shock, 

DO NOT

 submerge the appliance or allow the power cord 

to contact any form of liquid.  

16   DO  NOT

 allow the cord to hang over the edges of tables or counters. The cord may become 

snagged and pull the appliance off the work surface. 

17   DO  NOT

 allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances. 

18   ALWAYS

 use the appliance on a dry and level surface.

19   DO  NOT

 allow children to operate this appliance or use as a toy. Close supervision is necessary when 

any appliance is used near children.

20 

 This appliance is 

NOT

 intended to be used by people with reduced physical, sensory, or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person responsible for their safety. 

21   ONLY

 use attachments and accessories that are provided with the product or are recommended by 

SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja 

may cause fire, electric shock, or injury. 

22   NEVER

 place a blade assembly on the motor base without it first being attached to its corresponding 

container (bowl) and lid.

23 

 Keep hands, hair, and clothing out of the container when loading and operating.

24 

 During operation and handling of the appliance, avoid contact with moving parts.

25   DO  NOT

 fill container past the 12-Cup line. 

26   DO  NOT

 operate the appliance with an empty container.

27   DO  NOT

 microwave any containers or accessories provided with the appliance. 

28   NEVER

 leave the appliance unattended while in use. 

29   DO  NOT

 blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose 

a risk of the user being burned.

30   DO  NOT

 process dry ingredients with the Chopping Blade Assembly.

31 

 To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl 

properly in place.

32   DO  NOT

 perform grinding operations with the Chopping Blade Assembly. 

33   NEVER

 operate the appliance without lids and caps in place. 

DO NOT

 attempt to defeat the interlock 

mechanism. Ensure the container and lid are properly installed before operation.

34 

 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can 

cause containers to shatter and potentially result in personal injury and property damage.  

35 

 Keep hands and utensils out of containers while processing to reduce the risk of severe personal 

injury or damage to the appliance. A scraper may be used 

ONLY

 when the processor is not running. 

When using the processor, always use food pusher to add food. 

NEVER

 add food by hand.

36   DO  NOT

 attempt to remove the container or lid from the motor base while the blade assembly is still 

spinning. Allow the appliance to come to a complete stop before removing lids and containers. 

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

 WARNING

To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions 

must always be followed, including the following numbered warnings and subsequent 

instructions. Do not use appliance for other than intended use.

Содержание NF700 Series










Отзывы: