8
9
ninjakitchen.com
1
Place the brewer on a dry, clean, and
level surface. Plug your brewer in and
power it on.
2
Remove the water reservoir from the
unit by lifting it straight up
(Fig� 1)
.
Remove the lid entirely and fill the water
reservoir to the desired level
(Fig� 2)
.
NOTE:
DO NOT fill past the 12-Cup Line.
If overfilled, remove the water reservoir
from the brewer and pour out water until
the level is no higher than the 12-Cup Line.
3
Place the filter holder in the brew basket
(Fig� 3)
. Then place the permanent filter or
a #4 paper filter in the filter holder.
NOTE:
If using a paper filter, fold the
paper filter along the seams, open it fully,
and firmly press it into the filter holder,
making sure it is fully seated.
Fig. 1
Fig. 3
4
Add your desired amount of coffee
grounds to the brew basket.
5
Place the brew-through lid on the
carafe and turn clockwise to lock into
place
(Fig� 4)
. Then place carafe under
the brew basket
(Fig� 5)
.
6
Select either CLASSIC or RICH brew.
If you are brewing 4-cups or less, also
select SMALL BATCH.
(Fig� 6)
.
7
Press BREW to start brewing. When the
brewing is complete, the unit will beep.
NOTE:
Each brew has a pre-infusion cycle
with varying times. The brew will begin, pause
for a short period of time, and then continue
brewing. This pre-infusion cycle is used to
evenly saturate the coffee grounds.
Integrated Ninja Scoop is equivalent to 1 tbsp. of coffee.
Fig. 2
Fig. 5
Fig. 4
Fig. 6
HOW TO BREW
PREPARING & USING YOUR NINJA® COFFEE BREWER
Integrated Ninja® Scoop
BATCH SIZE
CUPS OF COFFEE
GROUNDS
WATER
Small Batch
(SMALL BATCH button on)
2 cups
2 Ninja Scoops or 2 tbsp.
2-cup line
4 cups
4 Ninja Scoops or 4 tbsp.
4-cup line
Full Carafe
(SMALL BATCH button off)
6 cups
6 Ninja Scoops or 6 tbsp.
6-cup line
8 cups
8 Ninja Scoops or 8 tbsp.
8-cup line
10 cups
10 Ninja Scoops or 10 tbsp.
10-cup line
12 cups
12 Ninja Scoops or 12 tbsp.
12-cup line
COFFEE MEASUREMENT CHART
ENGLISH
