Master-making Density Adjusting
5 steps for master making density, lighter, light, normal, dark, darker, which are indicated by 5 density
light.
1. Press density switch button (the middle button) as below, then the signal light will be on.
2
．
Press density adjusting buttons to select the printing density.
3
．
Back to select the scanning density after press density switch button, then the indicator light of
density switch is off.
◆
Back to scanning density in standard settings.
●
Adjust according to step1---2 until the middle signal light is on.
Printing Density Adjusting
3 levels for printing density.
Adjust the printing density by increasing or decreasing the pressure of the pressure roller.
Turn it to high level, the printing density is dark.
Turn it to low level, the printing density is light.
43
