5
.
LCD Screen:
◆
Back to Zoom Standard Mode
:
●
Press zoom switch button or reset button.
Press “Master-making” key to start master making.
Density Adjusting
Scan Density Adjusting
Adjust the scan density in 5 levels. There are 5 indicator lights, lighter, light, normal,
dark, and darker. Increase density if original document is too light, while decrease the
density if the original is too dark.
◆
Choose “density” before master making.
Such as
:
Set the density to light.
Press density adjusting buttons (including density-light button and density-dark button) as below in the
operation panel to adjust the density. Press density-light button when you want to set light scan density.
Note
:
When the left light is on, it is master-making density adjusting.
◆
Indication
Back to scan density standard setting.
Press density adjusting buttons until the middle light is on.
42