—
8
—
●
power the probe, by placing it in the slot on wireless charging cradle for about 5 seconds;
after activation, the probe indicator lights green;
●
subject prepares before training;
●
launch the Biofeedback application on the smartphone;
●
register a username (first use), and logs in;
●
in the selected training mode, connect the probe Bluetooth, And began to record the data
and set the data to zero;
●
biofeedback probe is inserted into the anorectum, with the subject adjusting the posture;
●
training was started and the training mode was entered. The subject adjusted the anorectal
simulation training action according to the mobile app content prompts , Training lasts about
30 minutes;
●
after training, unplug the probe, disinfect, clean, dry, put back into the wireless charging
cradle for storage.
2.2 Charging the device
●
Connect the USB data cable plug to the socket under the charger, and then insert the DC
connector into the USB data cable connection port of the probe wireless charging cradle.
●
The biofeedback probe is placed in the charging slot on the probe wireless charging cradle,
as shown on Figure 2.1.
