19
Operating Instructions - GALAXY VISITOR 3 RTF FTR 2.4 GHz No. NE2529M2
No. NE2529M1
example, you can fly the model in a circle around you. With the
GALAXY VISITOR 3 in Auto Return mode, simply point the trans-
mitter aerial at the copter and turn round. Since the model always
tries to fly towards the aerial, the result is a circular flight path.
You can also cause the model to turn left or right: simply turn the
transmitter in the opposite direction to the desired turn. For exam-
ple, if you wish the GALAXY VISITOR 3 to move to the right, turn
the transmitter (and therefore its aerial) to the left, and vice versa.
NOTE:
the Auto-Return function is available both in conventional
and intelligent flight mode.
Binding the transmitter and receiver
Switch the transmitter on, set the throttle stick to the bottom posi-
tion (Idle), and place it about 30 cm from the model.
Switch the copter on by connecting the flight battery, and leave it
motionless. The red LED now flashes to indicate that the model
is in Bind mode. The binding procedure is successful if the red
LED glows constantly.
Binding is only necessary if you replace one of the radio control
system components.
CAUTION:
during the take-off procedure the transmitter
aerial must point towards the model's red LED. If you igno-
re this, you may encounter problems in flight when the in-
telligent flight mode or the Auto-Return function is selected.
