background image

13

Operating Instructions - GALAXY VISITOR 3 RTF FTR 2.4 GHz No. NE2529M2

No. NE2529M1

Trim settings, Mode 1

Throttle trim:

If the rotors start to spin without the 
throttle stick being touched, or do not 
respond to stick movements, you must 
adjust the throttle trim until they stop 
moving.

Yaw trim:

If the model's nose turns to right or left 
when it lifts off, adjust the yaw trim to 
correct the rotation until the model 
maintains a stable heading.

Pitch-axis trim:

If the model flies forward or back when 
it lifts off, adjust the pitch-axis trim until 
it hovers over one point.

Roll trim:

If the model moves bodily to left or right 
when it lifts off, adjust the roll trim until 
the model remains in a stable hover.

Trim settings, Mode 2

Throttle trim:

If the rotors start to spin without the 
throttle stick being touched, or do not 
respond to stick movements, you must 
adjust the throttle trim until they stop 
moving.

Yaw trim:

If the model's nose turns to right or left 
when it lifts off, adjust the yaw trim to 
correct the rotation until the model 
maintains a stable heading.

Pitch-axis trim:

If the model flies forward or back when 
it lifts off, adjust the pitch-axis trim until 
it hovers over one point.

Roll trim:

If the model moves bodily to left or right 
when it lifts off, adjust the roll trim until 
the model remains in a stable hover.

Содержание GALAXY VISITOR 3




























Отзывы: