5
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, email: [email protected]
Installation Overview
A. Product water storage tank
I. Product water tubing (3/8" blue)
B. Tank shut-off valve
J. Reverse osmosis membrane filter
C. Tank tubing (3/8" white)
K. Carbon post-filter
D. Air-gap faucet
L. Sediment/carbon pre-filter
E. Drain connection assembly
M. Automatic shut-off valve
F. Drain tubing (3/8" white)
N. Inlet fitting
G. Quick-connect fitting
O. Feed water tubing (1/4" green)
H. Drain tubing (1/4" yellow)
P. Feed water shut-off
The following instructions outline a typical water treatment system installation. Consult local plumbing codes and
building regulations as they may pose different or additional requirements for the installation. The installer is respon-
sible for ensuring that the installation is in compliance with all applicable state and local regulations.
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper
completion of this installation will require basic famil iarity with standard sink plumbing and proper use of common
hand and power tools. Improperly installed systems could result in water damage due to leaks or flooding.
Typical Installation Diagram
B
A
C
E
F
G
H
I
J
K
L
M
N
O
P
D
