Nilfisk-Advance Terra 4300B 908 4309 010, Инструкция по эксплуатации

Страница: 23 / 100

INSTRUCTIONS FOR USE ENGLISH
Terra™ 4300B 146 2810 000(2)2008-07 21
SKIRT HEIGHT AND OPERATION CHECK
Drive the machine on a level fl oor that is suitable for 1.
checking the skirt height.
Engage the parking brake with the pedal (3) and the lever
(4).
Turn the ignition key (72) to “0”.
2.
Side skirt check
Unscrew the knobs (23 and 21) and remove both left (20) 3.
and right doors (22).
Check the side skirts (13 and 14) for integrity. Replace the
4.
skirts when they have cuts (A, Fig. 13) larger than 0.79 in
(20 mm) or cracks (B) larger than 0.39 in (10 mm) (for skirt
replacement, refer to the Service Manual).
Check that distance from the ground of the side skirts
5.
(13 and 14) is within 0 – 0.12 in (0 – 3 mm) (A, Fig. 14). If
necessary, adjust the skirt height by using the slots on the
screws (A, Fig. 17).
Assemble the components in the reverse order of
6.
disassembly.
Front and rear skirt check
Remove the main broom as shown in the relevant 7.
paragraph.
Check the front (15) and rear skirts (16) for integrity.
8.
Replace the skirts when they have cuts (A, Fig. 13) larger
than 0.79 in (20 mm) or cracks (B) larger than 0.39 in (10
mm) (for skirt replacement, refer to the Service Manual).
Check that:
9.
The front skirt (A, Fig. 18) slightly touches the fl oor (A, •
Fig. 15).
The distance from the ground of the rear skirt (B, Fig.
•
18) is within 0 – 0.12 in (0 – 3 mm) (A, Fig. 14).
If necessary, adjust the skirt height by using the slots on 10.
the screws (C and D, Fig. 18).
Press the front skirt lifting pedal (5) and check that the
11.
front skirt (A, Fig. 16) turns upward for about 90° (as
shown in the
fi gure); then release the pedal and check
that the skirt does not remain in an intermediate position
but returns to its initial position. If necessary, for the front
skirt control cable adjustment or replacement, refer to the
Service Manual.
Assemble the components in the reverse order of
12.
disassembly.
S311400 S311401
Figure 13 Figure 14
S311402 S311403
Figure 15 Figure 16
A
A
S311404
Figure 17
S311405
Figure 18