manualshive.com logo in svg

Nilfisk-Advance SW700B, Руководство оператора

Поделиться
Скачать
Nilfisk-Advance SW700B Скачать руководство пользователя страница 9

 

56041472(2)00-02

 

PREPARING A NEW MACHINE

 

2

 

- If the battery is set without acid solution it 

must be filled up (density from 1,27 to 1,29 
kg at 25°C) according to the instructions 
contained in next paragraph.

 

BATTERIES FILLING UP WITH ACID SOLUTION
Please pay a strict attention when working 
with sulphuric acid, as it corrosive. If it comes 
in contact with the skin or the eyes, wash 
abundantly with water and call a doctor.

Battery has to be filled up in a properly 
ventilated area.

 

Fill up each element of the battery with acid; 
the right level is roughly 10÷15 mm over the 
electrodes.

After one hour fill up with acid if necessary.

Let battery rest for one hour and proceed 
with the charging (please refer to the 
paragraph “MAINTENANCE”). When carrying 
out the recharge operation, all the caps of the 
battery have to be open.

 

Warning! Before starting the recharge 
operation, the connector of the battery must 
be disconnected from the machine.

 

At the end of the recharge operation close all 
the caps of the batteries, clean their upper 
part and remove all possible acid remains.

Connect the battery’s connector to the 
machine.

 

6

Содержание SW700B































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды