56041472(2)00-02
It requires one 12-volt battery or alternatively,
it is also possible to use two 6-volt batteries
with a serial connection and with a higher
capacity (for instance: 240 Ah @ 20).
According to the country where it is sold,
there are three possibilities:
1
- Battery is supplied with the machine and it
is set, complete with acid solution and
ready to use.
2
- Battery is supplied with the machine and it
is set (but not complete with acid solution).
3
- Battery is not supplied.
Before installing batteries, carefully read the
information written on the decal sticked
under the bonnet.
Tilt the machine’s bonnet and check which
option is applicable for your machine.
If the battery is set, open one of the
ventilation caps to check whether it is
complete with electrolyte.
If the battery is complete with electrolyte:
1a
. Check for the level of the electrolyte and
fill up if necessary. (Fill up with destilled
water only).
1b
. Carry out a recharge operation (see
paragraph “MAINTENANCE”) as specified
in the following pages.
Warning! Before starting the recharge
operation, the connector of the battery must
be disconnected from the machine.
During recharging, all battery’s caps have to
be open.
When the recharge is concluded, the battery’s
connector can be reconnected to the machine.
PREPARING A NEW MACHINE
5
