56041474
INTRODUCTION
This manual will help you get the most from your Sweeper Advance.
Any “left” or “right” indications are always defined with reference to the machine forward movement direction. He has the skilled
personnel, the original parts and the tools needed to meet your requirements. The machine should not be used without protection devices.
For your safety, make sure that all the safety guards are closed or mounted correctly before stating up the machine.
PARTS AND SERVICE
Repairs, when required should be performed by your Authorized Advance Service Center, who employs factory trained service personnell,
and maintains an inventory of Advance original replacement parts and accessories.
Call the Advance Dealer named below for repair parts or service.
Please specify the Model and the Serial Number when discussing your machine.
NAME PLATE
The Model Number and the Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when
ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
GENERAL SAFETY RULES
Carefully follow the rules described below to avoid injury to the operator and damage to the machine.
Carefully read the labels on the machine, do not cover them for any reason and replace them immediately if they become worn or
damaged.
Do not place containers with liquids on the machine.
The machine storage temperature should range between -25°C and +55°C.
Humidity should range between 30 and 95%.
Do not use the machine in an explosive atmosphere.
Do not use the machine as a transport vehicle.
Do not allow the brushes to operate while the machine is stationary to avoid damaging to the floor.
In case of fire, use a powder extinguisher. Do not use water.
Do not bump into shelves or scaffolding where there is a risk of falling objects.
Adjust the operating speed to the floor adhesion.
Do not exceed the declared slope limits to avoid unstable conditions.
When the machine is parked, remove the key and engage the parking brake.
When machine operating malfunctions occur, make sure that they are not caused by a lack of routine maintenance. If not, request
assistance from the service centre.
If parts must be replaced, request ORIGINAL spare parts from a dealer and/or Authorised Retailer.
For all maintenance operations, disconnect the electric power supply to the machine.
Do not remove the guards which require the use of tools to be disassembled.
Do not wash the machine with direct or pressurised water streams, or with corrosive substances.
The machine should be inspected by a service centre every 200 hours of operation.
The machine must never be left unattended, during the scrapping phase, because of the presence of toxic-harmful materials (batteries,
oils, etc.) which are subject to standards that require disposal in special centres.
The machine will not generate damaging vibrations.
MODIFICATION AND IMPROVEMENTS
Our company constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obligated to apply such benefits to the machines that were previously sold.
SAFETY
How to prevent accidents.
No accident prevention programme is effective without the complete co-operation of the person directly responsible for operating the
machine.
Most of the accidents that may occur in a company, on the job or during transfers are caused by the non-observance of the fundamental
safety rules.
A careful and cautious user is the best guarantee against accidents and is more effective than any type of prevention programme.
SAVE THESE INSTRUCTIONS!
INTRODUCTION/GENERAL INFORMATION
1
Model:
Serial No.:
Power:
Tot weight:
Prod. No.:
Max axel rear:
Max axel front:
Noise level:
Voltage:
MADE IN ITALY
Nilfisk-Advance, Inc.
Plymouth, MN, USA
www.nilfisk-advance.com
LISTED Conforms to
UL STD. 583
9901122
