56041474
Once mounted, the batteries must be charged
to give them the rated Volt and Ampere
values. To charge them use a suitable battery
charger.
A
-Make sure that the network Volt and Hz
ratings correspond to the values indicated on
the battery charger. Connect the battery
charger to the battery
cables using the
special plug.
Remove all
battery caps
and turn
on the
battery
charger.
After the battery
has been charged,
turn off the battery
charger, disconnect the
cable plug and screw the caps back on the
batteries. Connect the plug to the outlet
located on the machine and close the seat
cover.
Each time the batteries are charged, repeat
the operations from point (
A
).
3
- If the machine is supplied with no
batteries, they have to be provided and
mounted. It is recommended to use the
service of qualified personnel to chose and set
batteries.
PRELIMINARY OPERATIONS
7
