Nilfisk-Advance SH TRUCK, Инструкция по эксплуатации

Страница: 23 / 59

23
SH TRUCK
Original Instructions
%3#
/+
(/52-%4%2
(005-0 XXXXX
(%!4%2 XXXXX
$%4%2' XXXXX
6.1 Hour counters
Your SH TRUCK features built-
in hour counters that keep track
of the number of working hours
on your machine.
6.2 Oil
Your SH TRUCK is equipped
with an electronic “oil sensor”,
which monitors the level of
lubricant oil in the high-pressure
pump. If the oil level (by mal-
function or excessive wear)
should drop to a low level, your
SH TRUCK will stop. The red
light fl ashes. The display shows
hour counters. Topping up the oil cup of the
pump will be possible, but you
should send for a Nilfi sk service
technician as soon as possible
to disclose the cause of the oil
loss.
PROTECT THE ENVIRON-
MENT Waste oil and oil sludge must
be removed as laid down in the
instructions.
%3#
/+
(/52-%4%2
(005-0 XXXXX
(%!4%2 XXXXX
$%4%2' XXXXX
By depressing the button "Heat-
ing ON/OFF" (5) to switch off
the heating and then depres-
sing the red “STOP” button (4)
and keeping it depressed, you
will be able to see the number
of working hours of the high
pressure pump, the heating
system and the detergent pump
through the inspection window
(10).
Letting go of the “STOP” button
will switch off the hour counter
display again.
Maintenance Schedule
Weekly
After the fi rst 50
operating hours
Every six months
or 500 operating
hours
As required
6.2 Checking pump oil level

- Changing pump oil
 
6.3 Cleaning water fi lter
 
6.5 Fuel fi lter
 